Recent content by mar

2023 sudo dnf -y update sudo dnf -y install https://download.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm sudo yum-config-manager --enable powertools sudo dnf install --nogpgcheck https://mirrors.rpmfusion.org/free/el/rpmfusion-free-release-8.noarch.rpm -y sudo dnf install...

still haven't gave up!

20. Disable Telnet Services Tab 21. Disable Wireless , Wireless Tab DONE Upgrading 1. Enable SSHd and Telnet on the Services tab of the DD-WRT GUI 2. upgrade via Administration Tab -> upgrade firmware 3. wait about 30 minutes, then reboot if flash didn't revert to old 4. Disable SSHd and...

11. Enable SSHd on the Services tab of the DD-WRT GUI if you haven’t already. 12. Use WinSCP (use the 192.168.1.1 ip address, and "root" "admin" for username and password) If message click UPDATE and navigate to the "/tmp/root" folder on the router. 13. Transfer (drag & drop from the right...

8. Modify New CFE with unique device parameters. a. Open CFEEdit.exe (included with CFE packages zip file linked above). b. Click File-> Open CFE… and select the binary file.(you saved this file in step 5) c. Go to the Advanced Mode tab, then modify accordingly as described in the following...

---NOTE: You will need the following information if you EVER want to revert back to stock!--- 5. Make/save a backup of your stock CFE by browsing to: http://192.168.1.1/backup/cfe.bin Save the resulting file to your computer. 6. Enable Telnet (enabled by default in the Super Hacky firmware)...

1. Restore firmware to 1.1.40.160989, disable disable automatic updates 2. Flash the default stripped down version of DD-WRT (linksys-ea6400-numinit-super-hacky-smaller-version.bin) 3. ping 192.168.1.1 until <1ms 3. a. navigate to 192.168.1.1 4. Once the flash completes Log into DD-WRT...

tet

renew let's encrypt certbot renew --dry-run certbot renew